stone abrasive silicon flap grinding disc
coarser grain size more smaller, more faster for grinding efficiency, but the grinding effect is rough.
coarser grain size more larger, more lower for grinding efficiency, but the polishing effect will be smoother.
Product features: flap wheel is made of glass fiber mesh cover, nylon cover, plastic cover and other materials.
The coated abrasive tool is made of high-grade abrasive cloth as grinding material by special process.
It is divided into type 27 and type 29.
it is installed in the angular direction.
Grinding machine, suitable for ship repair, automotive industry iron, non-ferrous metals, stainless steel, stone and plastic grinding.
as well as welding, stamping parts, flashing can be used interchangeably with resin-shaped grinding wheel.
It has high elasticity, good self-sharpness, high grinding efficiency, good heat dissipation, low noise and long service life.
1. Check the abrasive cloth wheel for no deformation, moisture or falling off. If not, please replace it.
2. It is strictly forbidden to knock the abrasive cloth wheel during installation to keep the elastic tight.
and ensure that the angle grinder has a complete protective cover.
3. please wear glasses, masks, gloves and other protective equipment.
or protective mask, and put on the apron.
4. After installation, please idle free for 1 minute near the ground.
5. Keep the abrasive cloth wheel and the workpiece working surface at an inclination angle of 15 degrees to 30 degrees during the grinding operation.
It is strictly prohibited to collide with the workpiece and excessive force.
6, please do not exceed the rated number of revolutions of the abrasive cloth wheel
7. Keep it ventilated and dry during storage. Do not squeeze or absorb moisture.